Structural Insulated Panel Specs

General Description

Our structural insulated panels are a high quality urethane injected foam core panel. They are used in commercial, multi-family, and residential construction. They can be used as wall, roof, and floor panels. This one-piece unit replaces conventional stud framing and fiberglass batt insulation. Our structural insulated panels come with a limited warranty. Ask your dealer for more information.

Our structural insulated panels are composed of a polyurethane foam core sandwiched between four pieces of 7/16" Oriented Strand Board. The polyurethane core is a glue that bonds directly to the OSB and provides the strongest bond in the industry. Our structural insulated panels come complete with top and base plate lumber, door and window cutouts and frames, as well as electrical conduit chases and J Boxes.


Physical Properties

Insulation: Polyurethane, 2.2 pound density, 7.69 R-value per inch, UL rated Class 1 closed cell foam. Our product contains no formaldehyde or CFC's. Polyurethane also serves as a glue and when injected under pressure forms one of the strongest bonds in the industry. Exterior skin: 7/16" Oriented Strand Board. OSB shall be identified on the panel with an APA or PFS performance mark, with an Exposure I durability rating. Minimum physical properties shall be tested and as described in APA PRP-108 or PFS PRP-451.

Panel Thickness: Our structural insulated panels come in 2 different sizes. 4.0" wall/roof panel, 6.5" wall/roof/floor panel.

Structural Properties: Our panels are engineered to meet all current building codes. Engineering spec’s are available for any application.

Fire Specifications: UL rated Class 1 foam. Flame spread of 20 (ASTM E-84) Smoke Developed of 300 (ASTM E-84) Polyurethane is a thermoplastic, which will not melt. If left to itself it will not support combustion.

Protection: Panels should be covered at all times before installation. Make sure there is proper drainage around and away from panels before installation. Keep all panels elevated above the ground when storing. Do not wrap panels tightly with plastic. This may allow condensation to accumulate inside the wrap.

Warranty: Our structural insulated panels carry a factory limited warranty. Ask us for details.

 

 


Home Page     |     About Us     |     R-Value     |     Poly vs EPS     |     Jobs     |     Specs     |     Contact

All content Copyright © 2008 Titan Marketing     Website Hosting and Design by T1 Technologies, Inc.

SiteLock